Conley Valves offer three distinct advantages. 1) All glass fiber construction – no metal working parts to corrode. 2) Ease of serviceability – internal mechanism may be removed and replaced in seconds without removing the valve from the line. 3) Low cost – virtually the price of thermoplastic valves. Conley Swing Check Valves are available in Epoxy, Vinyl Ester, and Furan resin liner systems in standard 60 mil or optional 100 mil liner thicknesses. All liners are reinforced with multiple layers of Nexus®. Conley Swing Check Valves may be mounted either vertically or horizontally with unrestricted flow. With standard face to face ANSI dimensions, replacing in line valves is never a problem with Conley Swing Check Valves.
Conley Diaphragm Valves Conley Diaphragm Valves offer complete corrosion protection both internally and externally. Excellent for throttling of corrosive liquids with a cost savings over exotic alloys and lined steel. Corrosion resistance plays an important part of Conley Diaphragm Valves with the availability of Epoxy, Vinyl Ester or Furan liner systems in standard 60 mil or optional 100 mil liner thicknesses. All liners are reinforced with multiple layers of Nexus®. Non composite external parts are 316 stainless steel. Teflon bearings eliminate bonnet grease fittings. Light weight is another feature of Conley Diaphragm Valves; weighing approximately one-third of their metal counterparts. Conley Diaphragm Valves may be mounted either vertically or horizontally and may be serviced without removal from the line. Utilizing standard face to face ANSI dimensions, interchangeability is never a problem.